Control Valve Upper Body Assembly Cleaning and Inspection
| Callout | Component Name |
|---|---|
|
WARNING:
Valve springs can be tightly compressed. Use care when removing retainers and plugs. Personal injury could result.
CAUTION:
Do not remove the exhaust backfill pressure relief retainer, spring, or ball valve (refer to arrow in above illustration for location). The retainer is set to a precise depth. Replacement of this retainer could cause internal transmission damage. Preliminary Procedure: Clean and inspect all valve components, locating pins, and the valve body. The control valve upper body is replaceable only as an assembly. |
|
| 1 | Clutch Boost Valve Train |
| 2 | 1-2-3-4 Clutch Regulator Valve Train |
| 3 | 3-5 Reverse Clutch Regulator Valve Train |
| 4 | Clutch Boost Valve Train |
| 5 | 2-6 Clutch Regulator Valve Train |
| 6 | Clutch Boost Valve Train |
| 7 | CBR1/4-5-6 Clutch Regulator Valve Train |
| 8 | Actuator Feed Limit Valve Train |
| 9 | Control Valve Body Locator Pin |
| 10 | Control Valve Body Locator Pin |
| 11 | Control Valve Body Locator Pin |