Floor Shift Control Knob Replacement

Fig 1: Floor Shift Control Knob Replacement

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . NOTE: Do NOT pull or pry on the shift boot. This action may damage the shift boot retainers. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Open the console compartment door. Apply the parking brake. Place the shift lever in NEUTRAL position.
1	Shift Lever Handle Screw Tighten: 4 N.m (35 lb in)
2	Upper Trim Plate Console-Refer to Front Floor Upper Console Trim Plate Replacement (RHD w/Manual Transmission) or Front Floor Upper Console Trim Plate Replacement (RHD w/Automatic Transmission) or Front Floor Upper Console Trim Plate Replacement (LHD w/Automatic Transmission) or Front Floor Upper Console Trim Plate Replacement (LHD w/Manual Transmission)
3	Shift Lever Handle Tip: The console shift bezel retainers must be released from the underside of the console upper trim plate.