LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Luxury, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 584 (Wiring Systems And Power Management - Rear Window Defogger X1 Through Yaw And Lateral Accelerometer Sensor) >> Windshield Outside Moisture Sensor (CE1)

Windshield Outside Moisture Sensor (CE1)

WARNING: This page is about a different car, the 2009 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Windshield Outside Moisture Sensor (CE1) Connector End View
GM722341Courtesy of GENERAL MOTORS CORP.
Windshield Outside Moisture Sensor (CE1)

Pin Wire Circuit Function
1 0.35 L-GN 482 Rain Sense Signal (2)
2 0.35 TN 481 Rain Sense Signal (1)
3 0.35 BK 850 Ground
4 0.35 YE 243 Accessory Voltage
Connector Part Information 
  • OEM: 43645-0400
  • Service: 15306387
  • Description: 4-Way F Micro Fit (BK)
Terminal Part Information 
  • Pins: 1-2, 4
  • Terminal/Tray: 43030-0010/23
  • Core/Insulation Crimp: H/H
  • Release Tool/Test Probe: J-38125-213/J-35616-64B (L-BU)
  • Pin: 3
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit