Cable Removal - Transmission End

WARNING: This page is about a different car, the 2009 GMC Canyon and 2009 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Cable And Mounting

Courtesy of GENERAL MOTORS CORP.

Remove the range selector cable retainers (2) from the frame.

Fig 2: Heat Shield And Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the heat shield bolts (1).
Remove the heat shield (2).

Fig 3: View Of Cable And Mounting

Courtesy of GENERAL MOTORS CORP.

NOTE: Do not pull on the boot portion of the cable.

Disconnect the range selector cable end (3) from the range selector lever.
Remove the retainer (1) from the range selector cable (2).
Push the range selector cable locking tabs (2) inward toward each other to release the cable from the bracket.