Removal Procedure

WARNING: This page is about a different car, the 2009 GMC Canyon and 2009 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Ensure the vehicle is in the PARK position.
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

Fig 1: Transmission Vent Hose Retainer

Courtesy of GENERAL MOTORS CORP.

Disconnect the transmission vent hose retainer (4) from the transmission range selector cable bracket.

Fig 2: Heat Shield And Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the heat shield bolts (1).
Remove the heat shield (2).

Fig 3: View Of Cable And Mounting

Courtesy of GENERAL MOTORS CORP.

NOTE: Do not pull on the boot portion of the cable.

Disconnect the range selector cable end (3) from the range selector lever.
Remove the retainer (1) from the range selector cable (2).
Push the range selector cable locking tabs (2) inward toward each other to release the cable from the bracket.

Fig 4: View Of Transmission Range Selector Cable Bracket

Courtesy of GENERAL MOTORS CORP.

Remove the bolts securing the transmission range selector cable bracket to the transmission.
Remove the transmission range selector cable bracket from the transmission.