Manual Shift Detent Lever with Shaft Position Switch Assembly and Park Pawl Actuator Removal

WARNING: This page is about a different car, the 2009 GMC Canyon and 2009 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Manual Shift Detent Lever with Shaft Position Switch Assembly

Courtesy of GENERAL MOTORS CORP.

Remove the following parts:
1. Manual valve link (89)
2. Manual shift detent lever hub pin (92) discard, do not reuse
3. Manual shift detent lever with shaft position switch assembly (88)
4. Parking lock actuator assembly (85)
5. Manual shaft (84)

Fig 2: Identifying Manual Shaft Seal

Courtesy of GENERAL MOTORS CORP.

Remove the manual shaft seal (82) with a screwdriver.

Fig 3: View Of Parking Lock Bracket & Bolt

Courtesy of GENERAL MOTORS CORP.

Remove the following components:
1. The parking lock bracket bolt (87)
2. The parking lock bracket (86)