LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Luxury, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 285 (Automatic Transmission - 4L60-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Input Sun Gear Bushing Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Canyon and 2009 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Input Sun Gear Front Bushing
    GM213042Courtesy of GENERAL MOTORS CORP.
  1. Using J 34196-4 which is part of kit J 34196-B:  bushing service set with J 8092:  driver handle, install the input sun gear front bushing (657).
  2. Using J 34196-6 which is part of kit J 34196-B:  bushing service set with J 8092:  driver handle, install the input sun gear rear bushing (659).