LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Luxury, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> On-Vehicle Repair Information >> Transmission Mount Replacement (2WD) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Transmission Support
    GM1235550Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Support the transmission with a transmission jack.
  3. Remove the 2 nuts securing the transmission mount to the transmission support.
  4. Raise the transmission off of the transmission support.
    5. Fig 2: Transmission Mount, Spacer And Bolts
    GM2007877Courtesy of GENERAL MOTORS CORP.
  5. Remove the transmission mount bolts (4).
  6. Remove the transmission mount (3).
  7. Remove the transmission mount spacer bolts (1).
  8. Remove the transmission mount spacer (2).
scientia non olet · About LEMON Manuals