LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Luxury, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Off-Vehicle Repair Information >> Reverse Input Clutch Bushing Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Reverse Input Clutch Front Bushing
    GM7872Courtesy of GENERAL MOTORS CORP.
  1. Using the J 25019-9  with the J 8092  , install a reverse input clutch front bushing (603). See Special Tools .
    2. Fig 2: Installing Reverse Input Clutch Rear Bushing
    GM7874Courtesy of GENERAL MOTORS CORP.
  2. Using the J 34196-3 which is part of kit J 34196-B  with the J 8092  , install a reverse input clutch rear bushing (606). See Special Tools .
scientia non olet · About LEMON Manuals