LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Luxury, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Off-Vehicle Repair Information >> Reaction Gear and Carrier Installation >> Installation

Reaction Gear and Carrier Installation: Installation

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Reaction Carrier/Support Thrust Bearing Assembly
    GM190451Courtesy of GENERAL MOTORS CORP.
  1. Install the reaction gear support to case bearing (692) onto the internal reaction gear support (685). Retain the bearing using J 36850  or equivalent.
  2. Install the internal reaction gear (684) and the internal reaction gear support (685) into the case.
  3. Install the reaction carrier/support thrust bearing assembly (683) into the internal reaction gear support (685). Retain bearing with J 36850  .
    4. Fig 2: Identifying Reaction Carrier Assembly
    GM190447Courtesy of GENERAL MOTORS CORP.
  4. Install the reaction carrier assembly (681) into the internal reaction gear.
scientia non olet · About LEMON Manuals