LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Luxury, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Off-Vehicle Repair Information >> Reaction Carrier Shaft Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Reaction Carrier Shaft Front Bushing
    GM5476Courtesy of GENERAL MOTORS CORP.
  1. Using J 34196-3 which is part of kit J 34196-B  with J 8092  , install a new reaction carrier shaft front bushing (665). See Special Tools .
    2. Fig 2: View Of Reaction Carrier Shaft Rear Bushing
    GM5477Courtesy of GENERAL MOTORS CORP.
  2. Using J 34196-3 which is part of kit J 34196-B  with J 8092  , install a reaction carrier shaft rear bushing (667). See Special Tools .
scientia non olet · About LEMON Manuals