LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Luxury, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Off-Vehicle Repair Information >> Input Sun Gear Bushing Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Input Sun Gear Front Bushing
GM213039Courtesy of GENERAL MOTORS CORP.

Using J 34196-5 which is part of kit J 34196-B  with J 8092  , remove the input sun gear front bushing (657) and rear bushing (659). See Special Tools .

scientia non olet · About LEMON Manuals