LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Luxury, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Off-Vehicle Repair Information >> Inner Manual Linkage Removal

Inner Manual Linkage Removal

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Inspecting Inner Manual Linkage
    GM880293Courtesy of GENERAL MOTORS CORP.
  1. Remove the following parts:
    1. Hex head nut (90)
    2. Manual valve link (89)
    3. Detent lever (88)
    4. Parking lock actuator assembly (85)
    5. Manual shaft retainer (83)
    6. Manual shaft (84)
    2. Fig 2: Identifying Manual Shaft Seal
    GM59273Courtesy of GENERAL MOTORS CORP.
  2. Remove the manual shaft seal (82) with a screwdriver.
    3. Fig 3: View Of Parking Lock Bracket & Bolt
    GM284393Courtesy of GENERAL MOTORS CORP.
  3. Remove the following components:
    1. The parking lock bracket bolt (87)
    2. The parking lock bracket (86)
scientia non olet · About LEMON Manuals