LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Luxury, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Off-Vehicle Repair Information >> Holding Fixture Installation >> Tools Required

Tools Required

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

J 8763-B  Holding Fixture and Base

    Fig 1: View Of J 8763-B
    GM190169Courtesy of GENERAL MOTORS CORP.
  1. Install the J 8763-B  onto the transmission.
  2. Install the J 8763-B  into the base.
scientia non olet · About LEMON Manuals