LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Luxury, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Off-Vehicle Repair Information >> 2-4 Band Servo 2nd Apply Piston Disassemble >> Disassemble

2-4 Band Servo 2nd Apply Piston Disassemble: Disassemble

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Servo Cushion Outer & Inner Spring With Retainer
    GM55932Courtesy of GENERAL MOTORS CORP.
  1. Use a J 22269-01  to compress the second apply piston assembly (17). See Special Tools .
  2. Remove the second apply piston retaining ring (14).
  3. Remove the servo cushion spring retainer (15), the servo cushion outer spring (16) and the servo cushion inner spring (105) (model dependent).
scientia non olet · About LEMON Manuals