No Fourth Gear, or Slips in Fourth Gear
WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
No 4th or Slipping 4th
| Checks | Causes |
|---|---|
| Checkball #2, 4, 8 or 12 | Valve body checkball in wrong location or an additional checkball is installed. Refer to Control Valve Body Installation . |
| Orificed Cup Plug (240) | Not fully pressed into pump cover. Refer to Oil Pump Stator Shaft Bushing Replacement . |