LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Luxury, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 201 (Automatic Transmission - 6L50/6L80/6L90 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - On Vehicle >> Transmission Mount Replacement (All Wheel Drive) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the exhaust system. Refer to Exhaust System Replacement .
  3. Support the transmission with a suitable jack and a block of wood.
    4. Fig 1: View Of Retainers
    GM1850371Courtesy of GENERAL MOTORS CORP.
  4. Remove the transmission vent hose from the retainers (6) on the mount assembly.
    5. Fig 2: View Of Body Mounting Bolts
    GM1850365Courtesy of GENERAL MOTORS CORP.
  5. Remove the transmission mount support to body mounting bolts.
    6. Fig 3: View Of Transfer Case Mounting Bolts
    GM1850363Courtesy of GENERAL MOTORS CORP.
  6. Remove the transmission mount support to transfer case mounting bolts.
  7. Remove the transmission mount support assembly from the vehicle.
scientia non olet · About LEMON Manuals