Low and Reverse Clutch Plate Installation

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Low & Reverse Clutch Plate Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Low and Reverse Clutch (Waved) Plate
2	Low and Reverse Clutch Plate (Qty: 6)
3	Low and Reverse Clutch Plate Assembly (Qty: 6)
4	Low and Reverse Clutch Backing Plate Tip: Install the backing plate with the inner step side up.
5	Low and Reverse Clutch Backing Plate Retaining Ring Tip: Apply air to verify proper installation of all low and reverse clutch components.