Manual Shaft Detent Assembly and Manual Shift Shaft Position Switch Removal

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Manual Shaft Detent Assembly & Manual Shift Shaft Position Switch Component View

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Bolt M6 x 14.5
2	Manual Shaft Detent Assembly
3	Bolt M5 x 55
4	A/Trans Manual Shift Shaft Position Switch Assembly Electrical Connector Tip: Release the connector lock before disconnecting.
5	A/Trans Manual Shift Shaft Position Switch Assembly