Hood Primary and Secondary Latch Replacement

Fig 1: Hood Primary and Secondary Latch

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove Grille Support. Refer to Radiator Grille Reinforcement Support Replacement .
1	Bolts, Hood latch (Qty: 3) Tighten:  10 N.m (89 lb in)
2	Latch, Hood Tip:  Disconnect hood release cable.