LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Luxury, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim >> Repair Instructions >> Console Shift Lever Bezel Replacement (Automatic Transmission)

Console Shift Lever Bezel Replacement (Automatic Transmission)

Fig 1: Console Shift Lever Bezel Replacement (Automatic Transmission)
GM1557845Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications .
1 Plate Assembly, Console Upper
Refer to Front Floor Upper Console Trim Plate Replacement (RHD w/Manual Transmission)  or Front Floor Upper Console Trim Plate Replacement (RHD w/Automatic Transmission)  or Front Floor Upper Console Trim Plate Replacement (LHD w/Automatic Transmission)  or Front Floor Upper Console Trim Plate Replacement (LHD w/Manual Transmission) .
2 Bezel, Console Shift Handle
NOTE: Do NOT pull or pry on the shift boot. This action may damage the shift boot retainers.

Tip:  The console shift bezel retainers must be released from the underside of the console upper trim plate.