Heater and Air Conditioning Control Replacement

Fig 1: Heater and Air Conditioning Control Replacement

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the center instrument panel trim plate. Refer to Instrument Panel Center Trim Panel Replacement (Left Hand Drive) or Instrument Panel Center Trim Panel Replacement (Right Hand Drive) .
1	HVAC Control Module Screw Tip:  Disconnect the electrical connector. Tighten:  1.9 N.m (17 lb in)
2	HVAC Control Module