Assembling Cable

Fig 1: Cable Retaining Clip

GM1524272

Courtesy of GENERAL MOTORS CORP.

Install the cable retaining clip (2).
Push the transaxle end of the range selector cable (4) into the shift control end of the range selector cable (1) until the cable retaining clip (5) is fully locked into the range selector cable groove (3).
Ensure that the shift control lever and the transaxle range select lever are both in the park (P) position.

Fig 2: Cable Adjustment Lock

GM1524268

Courtesy of GENERAL MOTORS CORP.

Ensure the transaxle cable end (4) is not being held and that the spring is allowed to tension the cable.
Depress the cable adjustment lock (3) in order to lock both halves of the range selector cable (1, 4).

Fig 3: View Of Spring Loaded Cover

GM1524266

Courtesy of GENERAL MOTORS CORP.

Release the spring loaded cover (2) allowing it to cover the cable adjustment lock.
Adjust the automatic transmission range selector cable. Refer to Range Selector Lever Cable Adjustment (3.7L) or Range Selector Lever Cable Adjustment (5.3L) .
Lower the vehicle.