Removal Procedure
- Apply the parking brake.
- Shift the transmission into NEUTRAL.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the nut securing the transmission control lever to the manual shaft.
- Remove the transmission control lever from the manual shaft.
- Disconnect the electrical connector (3) from the switch (4).
- Remove the bolts securing the park/neutral back up switch to the transmission.
- Remove the park/neutral back up switch from the manual shaft.
IMPORTANT:
If the switch does not slide off the manual shaft, the outer edge of the manual shift shaft may need to be filed to remove any burrs.