Installation Procedure

IMPORTANT: Do not remove the retaining ring (671), except to replace it.

Fig 1: Inspection Areas On Reaction Sun Gear

Courtesy of GENERAL MOTORS CORP.

Fig 2: Identifying Sun Bushing, Sun Gear & Special Tools J 34196-B & J 8092

Courtesy of GENERAL MOTORS CORP.

If the reaction sun gear bushing (672) needs replacement, use J 34196-1 which is part of kit J 34196-B with J 8092 to remove the reaction sun bushing (672) from the reaction sun gear (673).

Fig 3: Identifying Sun Bushing & Special Tools J 34196-1, J 34196-B & J 8092

Courtesy of GENERAL MOTORS CORP.

Using J 34196-1 which is part of kit J 34196-B with J 8092 , install a new reaction sun bushing (672) into the reaction sun gear (673).

Fig 4: Identifying Reaction Sun Gear

Courtesy of GENERAL MOTORS CORP.

Fig 5: Aligning Thrust Washer Tangs With Low And Reverse Roller Clutch Race Splines

Courtesy of GENERAL MOTORS CORP.

Install the thrust washer (674) with the tangs pointing down. Index the tangs of the thrust washer with the splines of the low and reverse roller clutch race.