LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Adventure, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4L60-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Off-Vehicle Repair Instructions >> Inner Manual Linkage Installation

Inner Manual Linkage Installation

    Fig 1: Locating Parking Brake Pawl & Return Spring
    GM4191Courtesy of GENERAL MOTORS CORP.
  1. Install the parking lock bracket (86).
  2. NOTE: Refer to Fastener Notice.
  3. Install the parking lock bracket bolt (87).

    Tighten:  Tighten the bolt to 31 N.m (23 lb ft).

  4. Inspect the following items:
    • The parking brake pawl (81) for damage or cracks
    • The parking pawl return spring (80) for being broken or missing
  5. Fig 2: View Of Manual Shaft, Parking Lock Actuator Assembly, Inside Detent Lever & Components
    GM1568380Courtesy of GENERAL MOTORS CORP.
  6. Inspect the following items:
    • The manual shaft retainer (83) for damage or cracks
    • The manual shaft (84) for damage or burrs
    • The parking lock actuator assembly (85) for damage
    • The inside detent lever (88) for damage or cracks
    • The manual valve link (89) for damage
    • The hex head nut (90) for damage or stripped threads
  7. Install the following items:
    • The inside detent lever (88)
    • The parking lock actuator assembly (85)
    • The manual shaft (84) (model dependent)
    • The manual shaft retainer (83)
    • The hex head nut (90)
    • The manual valve link (89)

      Tighten:  Tighten the nut to 31 N.m (23 lb ft).