LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Adventure, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4L60-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Off-Vehicle Repair Instructions >> 1-2 Accumulator Disassemble

1-2 Accumulator Disassemble

    Fig 1: Using Air To Clean Accumulator Housing
    GM1755945Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Some models may not use an outer 1-2 accumulator spring (54).
  1. Blow air into the 1-2 accumulator housing (57) to remove the 1-2 accumulator piston (56).
  2. Remove the 1-2 inner (104) and outer (54) accumulator springs.