LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Adventure, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Power Brake Booster Inlet Hose Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Brake Booster Inlet/Outlet Hoses
    GM1618589Courtesy of GENERAL MOTORS CORP.
  1. Install the power brake booster inlet hose (2).
  2. Install the power brake booster inlet hose clamps (1).
  3. Remove the master cylinder assembly from the CH-47830  .
  4. Install the brake master cylinder and power brake booster assembly. Refer to Brake Master Cylinder with Power Brake Booster and Chassis Control Module Replacement (LHD) or Brake Master Cylinder with Power Brake Booster and Chassis Control Module Replacement (RHD) .
scientia non olet · About LEMON Manuals