LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Adventure, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Master Cylinder Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Brake Pressure Modulator Valve (BPMV)
    GM1618754Courtesy of GENERAL MOTORS CORP.
  1. Install the electronic brake and traction control module (2) and gasket (3) to the master cylinder. Refer to Electronic Brake and Traction Control Module Replacement .
  2. Install the master cylinder reservoir. Refer to Master Cylinder Reservoir Replacement .
  3. Install the power brake booster. Refer to Power Brake Booster Replacement .
scientia non olet · About LEMON Manuals