LEMON Manuals
: Even more car manuals for everyone
Home
>>
Hummer
>>
2008
>>
H2 4D Utility Wagon
>>
Repair and Diagnosis
>>
Transmission
>>
Transfer Case - BW 4484
>>
Diagnostic Information and Procedures
>>
DTC B272B
>>
Conditions for Setting the DTC
Conditions for Setting the DTC
The system constantly monitors the voltage on switch signal circuit.
If the system detects a voltage level under 0.44 volt or greater than 0.56 volts for 60 seconds, the DTC is logged.