Conditions for Running the DTC

P2723

• No DTCs P0716 or P0717.
• No DTCs P0722 or P0723.
• No DTCs P1825 or P1915.
• The transmission input shaft speed is greater than 60 RPM.
• 1-2-3-4 clutch is commanded ON.

P2724

• No DTCs P0716 or P0717.
• No DTCs P0722 or P0723.
• No DTCs P1825 or P1915.
• The transmission input speed is equal to or greater than 200 RPM.
• The transmission output shaft speed is equal to or greater than 200 RPM.
• 1-2-3-4 clutch is commanded OFF.