Conditions for Running the DTC

P0815 or P0816

• No DTC P0826.
• No DTCs P1825 or P1915.
• The engine speed is between 500-7,500 RPM for at least 5 seconds.
• The time since the last gear selector range change is greater than 6 seconds.
• The DSC is powered by 12 volts.

P0826

• Engine speed is 500-6,500 RPM for at least 5 seconds.
• Ignition voltage is 8.6-19.0 volts.
• The DSC is powered by 12 volts.