LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 6L50/6L80/6L90 - DTC P0218 To DTC P0971 >> DTC P0736 >> Component Testing

Component Testing

  1. Perform the Line Pressure Check .
  2. Inspect the check ball 5 for possible sticking or damage.
    • If you found a concern with this check ball, repair the concern.
  3. Inspect the shift select valve 3 for sticking or damage.
    • If you found a concern with the shift select valve 3, repair or replace the valve or valve body.
  4. Inspect the low and reverse clutch assembly for wear or damage.
    • If you found a low and reverse clutch assembly concern, repair or replace the low and reverse clutch assembly as necessary.
scientia non olet · About LEMON Manuals