Seat Belt Replacement - Center Rear

Fig 1: Identifying Bolt For Center Rear Seat Belt

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the rear seat cushion latch covers by pulling upward to disengage the retainers. Remove the rear seat back cushion cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement .
1	Rear Seat Belt Anchor Plate Nut NOTE: Refer to Fastener Notice . Tighten: 55 N.m (41 lb ft)
2	Rear Seat Belt Nut Tighten: 55 N.m (41 lb ft)
3	Rear Seat Belt Assembly