Circuit/System Verification
IMPORTANT:
The seat belt pretensioners may deploy for impacts that are not severe enough to warrant frontal or side air bag deployment. The SDM is capable of sustaining 3 pretensioner deployment events, or one frontal or side deployment event. After the maximum number of deployments has occurred, DTC B0052 sets and becomes a latched code, which cannot be cleared.
- Verify DTC B0053 is not set.
- If DTC B0053 is set along with additional DTCs, other than B0052, repair the malfunction causing the DTCs before replacing the SDM.
- Verify DTC B0052 is not set.
- If DTC B0052 is set, clear DTCs. If the DTC sets, replace the SDM.
- Verify DTC B0055 is not set.
- If DTC B0055 is set, replace SDM.