LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating, Ventilation, And Air Conditioning >> Repair Instructions >> Mode Door Replacement - Lower >> Removal Procedure

Removal Procedure

    Fig 1: Heat Stakes On HVAC Module (Delphi)
    GM899652Courtesy of GENERAL MOTORS CORP.
  1. Remove the HVAC module. Refer to HVAC Module Assembly Replacement .
  2. If equipped remove the heat stakes (1) from the HVAC module (2) with a screwdriver and a hammer.
  3. Fig 2: Exploded View Of HVAC Module Assembly
    GM962571Courtesy of GENERAL MOTORS CORP.
  4. If equipped remove the HVAC module assembly screws.
  5. Separate the HVAC module assembly.
  6. Remove the air temperature separator plate (5) from the HVAC module assembly (10).
  7. Remove the lower mode door (9) from the HVAC module assembly (10).