Removal Procedure
Courtesy of GENERAL MOTORS CORP.
- Remove the HVAC module. Refer to HVAC Module Assembly Replacement .
- If equipped remove the heat stakes (1) from the HVAC module (2) with a screw driver and a hammer.
Courtesy of GENERAL MOTORS CORP.
- If equipped remove the HVAC module assembly screws.
- Remove the upper HVAC module case (3) from the lower HVAC module case (10).
- Remove the air temperature separator plate (5) from the lower HVAC module case (10).
- Remove the left temperature door (11) from the lower HVAC module case (10).