LEMON Manuals: Even more car manuals for everyone

Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC - Automatic >> Diagnostic Information and Procedures >> DTC B0183 or B0188 >> Conditions for Setting the DTC

Conditions for Setting the DTC

The BCM determines that the value of the sunload sensor signal is less than 5 counts (1 volt) or greater than 250 counts (5 volts).

scientia non olet · About LEMON Manuals