LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Engine Cooling System) >> Repair Instructions >> Fan Shroud Replacement - Lower >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Oil Cooler Hose Clip At Lower Fan Shroud
    GM367017Courtesy of GENERAL MOTORS CORP.
  1. Remove the cooling fan. Refer to Fan Replacement (Gasoline) .
  2. If equipped with engine oil cooler, remove the oil cooler hose clip from the lower fan shroud.
  3. Lift the lower fan shroud up in order to disengage the fan shroud from the retaining clips on the radiator.