LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Engine Cooling System) >> Repair Instructions >> Fan Replacement (Gasoline) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Fan Clutch Special Tools
    GM362333Courtesy of GENERAL MOTORS CORP.
  1. Remove the upper fan shroud. Refer to Fan Shroud Replacement - Upper .
  2. Install the J 46406  to the fan clutch.
    3. Fig 2: View Of Fan Assembly Removed
    GM367004Courtesy of GENERAL MOTORS CORP.
  3. Remove the fan hub nut from the water pump in a counterclockwise rotation.
    4. Fig 3: View Of Fan Clutch & Fan Blade
    GM367006Courtesy of GENERAL MOTORS CORP.
  4. Remove the fan clutch bolts from the rear of the fan blade.
  5. Separate the fan clutch from the fan blade.
scientia non olet · About LEMON Manuals