LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Engine Cooling System) >> Diagnostic Information and Procedures >> DTC P0480 or P0481 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, command the cooling fan relay 1 ON and OFF several times using the scan tool output control function. You should hear both fans turn ON and OFF. Both should run on low speed when turned ON.
  2. Ignition ON, command the cooling fan relays 2 and 3 ON and OFF several times using the scan tool output control function. When turned ON, the right fan should run on high and the left fan should remain OFF.
  3. Ignition ON, command the cooling fan relays 1, 2, and 3 ON and OFF several times using the scan tool output control function. When turned ON, both fans should run on high speed.
scientia non olet · About LEMON Manuals