LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Door Lock Systems & Door Handles) >> Repair Instructions >> Liftgate Actuator Rod Bracket Replacement

Liftgate Actuator Rod Bracket Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Liftgate Actuator Rod Bracket & Bolts
GM1725907Courtesy of GENERAL MOTORS CORP.
Liftgate Actuator Rod Bracket Replacement

Callout Component Name
Preliminary Procedure: 
Remove the liftgate garnish molding. Refer to Liftgate Garnish Molding Replacement .
1 Liftgate Actuator Rod Bracket Bolts
NOTE: Refer to Fastener Notice .

Tighten:  10 N.m (89 lb in)

2 Liftgate Actuator Rod Bracket