LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Door Lock Systems & Door Handles) >> Diagnostic Information and Procedures >> DTC B1023 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a scan tool and display the inputs data list of the affected door module.
    • If any of the integrated switch inputs are displayed as Active while in an inactive state, replace the door module.
  2. Clear the DTCs.
  3. Activate all of the integrated switch functions.
    • If the DTC resets, replace the affected door module.
scientia non olet · About LEMON Manuals