LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (Fixed & MOVEABLE Window Systems) >> Repair Instructions >> Windshield Upper Reveal Molding Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Upper Reveal Molding from Windshield
    GM105242Courtesy of GENERAL MOTORS CORP.
  1. Install the upper reveal molding (1) to the windshield (2).
  2. Align the notch in the molding to the center mark on the upper paint band on the windshield.
  3. Press the upper reveal molding on to the windshield starting at the center and working outboard to both sides.
  4. Install the windshield. Refer to Windshield Replacement .
scientia non olet · About LEMON Manuals