Rear Side Door Window Channel Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Door Window Run Channel

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
CAUTION: Refer to SIR Caution . Preliminary Procedures Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling . Place the rear door window in the full down position. Remove the rear door trim panel. Refer to Front Side Door Trim Panel Replacement . Remove the rear door inner sealing strip. Refer to Sealing Strip Replacement - Rear Door Window Belt Inner .
1	Rear Door Window Run Channel Tip: Use a plastic flat-bladed tool to assist in releasing the window run channel from the door frame. Carefully pull the window run channel from the door flange.

Callout

Component Name

CAUTION: Refer to SIR Caution .

Preliminary Procedures

Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling .
Place the rear door window in the full down position.
Remove the rear door trim panel. Refer to Front Side Door Trim Panel Replacement .
Remove the rear door inner sealing strip. Refer to Sealing Strip Replacement - Rear Door Window Belt Inner .

Rear Door Window Run Channel
Tip:

Use a plastic flat-bladed tool to assist in releasing the window run channel from the door frame.
Carefully pull the window run channel from the door flange.