LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (Fixed & MOVEABLE Window Systems) >> Repair Instructions >> Front Side Door Window Outer Sealing Strip Replacement (Escalade)

Front Side Door Window Outer Sealing Strip Replacement (Escalade)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Front Side Door Outer Sealing Strip, Clips & Fasteners
GM1674931Courtesy of GENERAL MOTORS CORP.
Front Side Door Window Outer Sealing Strip Replacement (Escalade)

Callout Component Name

Preliminary Procedure

  1. Lower the front side door window to the fully down position.
  2. Tape off the lower window frame to prevent damage to the door.
  3. Remove the outside rearview power mirror. Refer to Mirror Replacement - Power .
1 Front Side Door Fasteners (Qty: 3)
Tip:  Using a suitable tool, work the tool around the upper door frame to assist in loosening the sealing strip from the door flange.
2 Front Side Door Clips (Qty: 10)
Tip:  Using a suitable tool, work the tool down the side of the door frame to loosening the sealing strip from the door flange.
3 Front Side Door Outer Belt Sealing Strip
Tip: 
  1. Install the molding into the window opening by inserting the bottom legs of the molding to the door.
  2. Fully seat the molding to the belt flange between the corner of the door frame.
  3. Fully seat the molding to the upper and lower door frame and insert the fasteners and clips around the flange.