LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (Fixed & MOVEABLE Window Systems) >> Diagnostic Information and Procedures >> DTC B3824 >> Circuit/System Description

Circuit/System Description

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Accessory/RAP voltage is supplied to the right rear power window switch through the window lockout signal circuit. If the window lockout function is disabled, the body control module (BCM) supplies voltage to the rear window switches allowing for normal window operation from the rear switches. If the window lockout function is enabled, the BCM will not supply voltage to the rear window switches and the rear windows will only operate from the driver power window switch through the BCM up and down signal circuits.