LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Steering Wheel & Steering Column) >> Repair Instructions >> Steering Shaft Lower Bearing Replacement

Steering Shaft Lower Bearing Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Steering Column Bracket, Bolt, Electrical Connector & Bearing Adaptor
GM1728042Courtesy of GENERAL MOTORS CORP.
Steering Shaft Lower Bearing Replacement

Callout Component Name
CAUTION: Refer to SIR Caution .

Preliminary Procedure

  1. Remove the steering column. Refer to Steering Column Replacement .
  2. Remove the steering wheel position sensor. Refer to Steering Shaft Lower Bearing Replacement .
1 Steering Column Bracket Bolt (Qty: 3)
NOTE: Refer to Fastener Notice .

Tighten:  6 N.m (53 lb in)
2 Steering Column Bracket
3 Steering Wheel Position Sensor Electrical Connector
4 Steering Shaft Lower Bearing Adaptor
scientia non olet · About LEMON Manuals