LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Steering Wheel & Steering Column) >> Repair Instructions >> Intermediate Steering Shaft Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Steering Column Seal & Nuts
    GM362507Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the lower intermediate shaft from the upper intermediate shaft. Refer to Lower Intermediate Steering Shaft Replacement .
  2. Remove the nuts from the studs.
  3. Remove the seal from the vehicle.
scientia non olet · About LEMON Manuals