High Shift Effort
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
High Shift Effort
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Did you review the Steering wheel and Column Description and Operation? | Go to Step 2 | Go to Steering Wheel and Column Description and Operation |
| 2 | Verify that a high shift effort is required in order to shift out of the PARK position. Does the shifter operate normally? |
System OK | Go to Step 3 |
| 3 | Inspect for worn or damaged shift linkage components. Are the shift linkage components worn or damaged? |
Go to Step 6 | Go to Step 4 |
| 4 | Inspect for a damaged linear shift assembly. Is the linear shift assembly damaged? |
Go to Step 7 | Go to Step 5 |
| 5 | Inspect the shift cable for binding or misadjustment. Is the shift cable binding or misadjusted? |
Go to Step 8 | Go to Step 3 |
| 6 | Replace the shift cable. Refer to Automatic Transmission Range Selector Lever Cable Replacement
in Automatic Transmission - 4L60-E/4L65-E or to Automatic Transmission Range Selector Lever Cable Replacement
in Automatic Transmission - 4L80-E/4L85-E. Did you complete the repair? |
Go to Step 9 | - |
| 7 | Replace the linear shift assembly. Refer to Linear Shift Assembly Replacement . Did you complete the repair? |
Go to Step 9 | - |
| 8 | Adjust the shift cable. Refer to Automatic Transmission Range Selector Lever Cable Adjustment
in Automatic Transmission - 4L60-E/4L65-E or to Automatic Transmission Range Selector Lever Cable Adjustment
in Automatic Transmission - 4L80-E/4L85-E. Did you complete the repair? |
Go to Step 9 | - |
| 9 | Operate the system in order to verify the repair. Did you correct the condition? |
System OK | Go to Step 3 |